Audison AP4.9 bit
AP4.9 bit amplifier is ideal to realize a powerful two way front full active. The built-in processor, that this amplifier shares with the AP8.9 bit, provides the ability to assign the pre-outs to the AP1 D amplifier, creating a very powerful system in a small space thanks to the “rack mounting” system.
|Load Imp.||4 Channels||2 Channels (bridge)|
|4 Ohm||70 W x 4||260 W x 2|
|2 Ohm||130 W x 4|
The DRC is the digital interface between the AP4.9 bit and the user. The DRC mounted in the vehicle dashboard, provides access to control of the inputs and volume adjustments, balance, fader and subwoofer volume. Providing source selection between main, aux and optical inputs, it also provides four of the configurations created and saved by the bit one right at hand. The DRC also controls the functions of the Audison Thesis amplifiers when these are installed in the same system.
DRC Cable Extension kit for installations on especially long vehicles. Total length of the supplied cable with the extension is equal to 6,5 m / 225,90″.
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 1,5 m / 59,05”.
Optical cable ending with TOSLINK connectors for S/PDIF digital audio signals. Cable length: 4,5 m/177,16”
Optical adapter to extend optical cables featuring TOSLINK connectors.
Cable to connect AP4.9 bit to AP4 D and AP1 D amplifiers
The AP Speakers Output for AP8.9 bit is dedicated to the connection of the AP bit amplifiers with the input/output Extension cable.
Recommended to extend the number of inputs of AP bit amplifiers because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.