15-inch mobile audio single voice coil subwoofer
New polymer woofer cones and butyl rubber surrounds will not break down over time and will survive the rigors of harsh automotive environments.
High temperature copper voice coil (51mm) and polyamide former withstands the most rigorous use while maintaining extremely low distortion for bass punch and output.
Nickel plated heavy duty input terminals accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
Carbon composite basket based on the spokes of a wheel is lightweight, will not flex during peaks and looks great! Don’t be afraid to show off the back of your woofer.
Klippel optimized components using a state-of-the-art Klippel distortion analyzer, Polk engineers were able to optimize the woofer’s motor structure, voice coil alignment and suspension for the best possible performance, even at extreme listening levels.
Available matching grilles complement the wheel spoke design.
Dual voice coil configuration (MM1540DVC) also available.
All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime.
|Type||Dynamic Balance woofer with poly-composite cone|
|Total Frequency Response||18-150 Hz|
|Nominal Impedance||4 ohms|
|Driver Diameter||2″ (5.08cm)|
Thiele / Small Parameters
|Resonant Frequency||27 Hz|
|Xmax Linear||1 in|
|SD||128.5 sq in/829 sq cm|
|VAS||3.5 cu ft/100 L|
|Diameter||13 7/8″ (35.24cm)|
|Driver Mounting Depth|
|Top Mount||4 5/8″ (11.75cm)|
|Bottom Mount||5 1/4″ (13.34cm)|
|Dimensions||50 x 50 x 50 cm|