Description
The next generation Trip Meter utilises both the American GPS and Russian GLONASS satellite networks to achieve faster time to first fix and higher precision measurements.
Hummingbird’s GPS/GLONASS Trip Meter provides a highly visible and configurable distance readout, independent of the vehicle.
No installation is required. Two independent distance readouts, as well as speed and other statistics, are available.
Powerful Performance
Designed for harsh automotive environments, the module features a tough fascia with integrated buttons and LCD graphics display. An adjustable screw or suction mount allows for optimum positioning for the operator.
The ability to track 50 satellites simultaneously, enhanced receiver sensitivity and active antenna result in fast time-to-first-velocity-calculation as well as the ability to operate in the harshest RF environments such as canyons and cities. Speed errors will occur in RF blackout zones such as tunnels. Distance lost due to RF blackout is compensated for by adding it to the total distance recorded once satellites become visible again.
Three-dimensional velocity calculations are typically accurate to 0.36km/h and are updated 10 times per second. In application measurements of distance have typically resulted in accuracies of better than 0.25% over 1km. For best accuracy, the vehicle should be moving at a speed of greater than 2km/h.
Two trips are displayed simultaneously as well as current speed and the number of satellites currently being used. Trip statistics such as average speed, maximum speed and trip time can be viewed via the integrated menu. The display is highly visible both at night and in sunlight due to the use of an industrially rated, transflective graphics LCD display.
An external switch is provided that allows reset of trip A when pressed. Optionally, a freeze function can be enabled so that trip A freezes instead of resetting when the switch is pressed. The trip distance continues to be calculated, whilst the display is frozen and will be displayed as soon as freeze is released by pressing the switch again. If the external switch is pressed and held for 5 seconds, trip A will reset. The integrated keypad and menu allows for customisation of these and other functions.
The unit is provided with a 1.5m power cable terminated in a standard automotive cigarette-lighter connector. An external magnetic-mount antenna is included. A bulkhead-mount antenna is available for use in permanent installations.
Features
• 2 independent trips
• Cigarette lighter connection
• External reset switch
• Freeze modes
• Up/Down count
• Current & average speed display
• Highly configurable
• 10Hz updates
Reviews
There are no reviews yet.